|
| New Products |
 |
|
|
|
- To obtain the best result, the wall surface should be smooth and clean, free of old paper and without any holes or cracks.
- Center the photomural on the wall. We recommend starting with a middle bottom panel. The first panel determines the overall appearance and accuracy of the pasted mural. Before you start to place the first panel, we recommend drawing a horizontal line with the help of a level and a vertical line using a plumbline.
- Place the first panel in the middle of the wall and align with the lines drawn on the wall. If there are air bubbles after a panel is placed, do not worry - usually the bubbles will disappear while the photomural dries on the wall. We recommend overlapping the panels by approximately 0.1 inches (2 mm), as the panels may shrink during the drying period.
- The wallpaper paste inside the tube (2 oz.) is easy to mix with 3 pints (1.5 litres) of water. You can also use any other standard wallpaper paste.
- The paper may increase in size while wet. Do not soak the paste on the murals more than 1 - 2 minutes.
- You will find the directions for use on the backside of the murals or on a leaflet in the tubes.
- A manual you can find here.
|
|
|
|
|
Customer group:Guest
|
|
|
Artikel: 0 | Betrag: 0,00 EUR
